Fits the following transmissions: 700R4, 4L60, & early 4L60E. Finished in a black powder coat. Includes new mounting hardware. Purchase transmission mount separately. p/n GMTM.
1967-1969 Camaro/Firebird and 1968-1974 (note: distance between crossmember frame holes is approximately 30-3/8″. Measure your frame or crossmember to insure proper selection)
p/n RCF1-700 installation notes:
- this crossmember is installed with the Southside Machine label facing the rear of the vehicle. A second determining feature is crossmember center tube has a 1/2″ drain slot located on the bottom and on the passenger side next to the hump weldment.
- the crossmember is installed so that the exhaust clearance humps are closed on the top and open on the bottom.
- to utilize the provided 7/16 hardware it is necessary to enlarge the holes in the frame rails. If the installer chooses to utilize the stock size 3/8 hardware, it is strongly recommended that the installer obtains Grade 8 fasteners and washers to compensate.